General hydrophone initialization

An example of how to use the classes

import pyhydrophone as pyhy

Vpp = 2.0


# Hydrophone Setup
model = 1
name = 'SoundTrap'
serial_number = 67416073

st = pyhy.SoundTrap(name=name, model=model, serial_number=serial_number)

# Hydrophone Setup
sensitivity = -199.0
preamp_gain = 1
model = 1
mems_sensitivity = -199.0
name = 'AmarG3'
Vpp = 2

am = pyhy.AmarG3(name=name, model=model, sensitivity=sensitivity, preamp_gain=preamp_gain, serial_number=1,
                 mems_sensitivity=mems_sensitivity, Vpp=Vpp)

uaural = pyhy.uAural(sensitivity=-180, name='uAural', model='RX', serial_number=1, preamp_gain=12, Vpp=2.0)

bk_model = 'Nexus'
bk_name = 'B&K'
preamp_gain = -170
bk_Vpp = 2.0
bk_test = pyhy.BruelKjaer(name=bk_name, model=bk_model, preamp_gain=preamp_gain, Vpp=bk_Vpp, serial_number=1,
                          type_signal='test')
bk_ref = pyhy.BruelKjaer(name=bk_name, model=bk_model, preamp_gain=preamp_gain, Vpp=bk_Vpp, serial_number=1,
                         type_signal='ref')

upam_model = 'uPam'
upam_name = 'Seiche'
upam_serial_number = 'SM7213'
upam_sensitivity = -196.0
upam_preamp_gain = 0.0
upam_Vpp = 20.0
upam = pyhy.uPam(name=upam_name, model=upam_name, serial_number=upam_serial_number,
                 sensitivity=upam_sensitivity,
                 preamp_gain=upam_preamp_gain, Vpp=upam_Vpp)

aural_name = 'Aural'
aural_model = 'M2'
aural_serial_number = 0
aural_sensitivity = -164.0
aural_preamp_gain = 16.0
aural_Vpp = 2.0
aural = pyhy.MTE(name=aural_name, model=aural_model, serial_number=aural_serial_number,
                 sensitivity=aural_sensitivity,
                 preamp_gain=aural_preamp_gain, Vpp=aural_Vpp, string_format='%y%m%d_%H%M%S')

rtsys_name = 'RTSys'
rtsys_model = 'RESEA320'
rtsys_sensitivity = -180
rtsys_preamp_gain = 0
rtsys_Vpp = 2.0
serial_number = 3
rtsys = pyhy.RTSys(name=rtsys_name, model=rtsys_model, serial_number=serial_number,
                   sensitivity=rtsys_sensitivity,
                   preamp_gain=rtsys_preamp_gain, Vpp=rtsys_Vpp, mode='lowpower', channel='A')

icListen_name = 'icListen'
icListen_model = 0
icListen_serial_number = 0
icListen_sensitivity = -178
icListen_Vpp = 6
icListen_preamp_gain = 0
icListen = pyhy.icListen(name=icListen_name, model=icListen_model, serial_number=icListen_serial_number,
                         sensitivity=icListen_sensitivity, preamp_gain=icListen_preamp_gain, Vpp=icListen_Vpp)